English
- English
- Español
- SaudiArabia
FIBER OPTIC DISTRIBUTION BOX
The equipment is used as an intermediate distribution point or a termination point for the feeder cable to connect with a drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box by cus tomer’s requirement at the factory. This is a sealed unit and meanwhile it provides solid protection and management for the FTTx network building.
- Parameters
The equipment is used as an intermediate distribution point or a termination point for the feeder cable to connect with a drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box by cus tomer’s requirement at the factory. This is a sealed unit and meanwhile it provides solid protection and management for the FTTx network building.
1. FEATURES
1. Totally enclosed structure.
2. Material: ABS707k+UV, moisture proof, waterproof, dust-proof, anti-aging, protection level IP68.
3. Clamping, splicing, fixation, storage and distribution of feeder cable and drop cable are integrated.
4. The interior is equipped with 1x2 FTB splitter (unbalanced or balanced) +1x8 PLC splitter or just 1x8 PLC splitter and the bottom cover is welded by ultrasonic welding, which is non-detachable.
5. The box body can be wall mounted or derrick mounted, suitable for indoor and outdoor use
2. SPECIFICATION
1. Environmental requirement Working temperature: -40℃～+85℃ Relative humidity: ≤85% (+30℃) Atmospheric pressure: 70KPa~106Kpa
2. Main technical datasheet Insertion loss: ≤0.3dB UPC return loss: ≥50dB APC return loss: ≥60dB
3. Thunder-proof technical datasheet The insulation resistance between the grounding device and the metal parts of the box is no less than 2 ×104 MΩ/500V (DC); IR≥2 ×10 4MΩ/500V.
3. CONFIGURATION TABLE
MODEL | Size (Pic ) A*B*C | Max Capacity | Installation Size (Pic 2) D/E*F | Name |
AR-DB-CDO10P-HC | 200*208*96 | 1*8 PLC Splitter | 53*154*185 | CDO-S2-CT |
AR-DB-CDO10P-HC-70/30-1R-1B-8BL | 200*208*96 | 1*2 FBT + 1*8 PLC Splitter | 53*154*185 | CDO-CI-70/30 |
AR-DB-CDO10P-HC-R1-B | 200*208*96 | 1*2 FBT or PLC + 1*8 PLC Splitter | 53*154*185 | CDO-R1B |
Stainless steel screws |  |
Pole mounting kit |  |
Stainless steel strip |  |
Stainless steel screws |  |
Expanded particles |  |
4. PRODUCT CABLE WAYS
5. INSTALLATION
1. Wall-mounted installation Drill 3 holes into the wall based on the size in table 1, place the expansion bolt Φ7.5*40, place the box to match up the holes and use bolt to fasten. (Pic 3)
2. Pole-mounted installation Fix 1 set of the pole ring to the telecom pole (Pic 4)
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
INQUIRY
Add Successfully
