GTS-12-1

Optical fibre cable distribution box is a wiring line device of user distributions inFTTHsystem, it provides protection and management for fiber cable, and be used for terminating,cable branching, cross connection.

It is mainly used for user access point in FTTH-ODN network, it can be divided into indoorand outdoor type according to the installation scenario, and can be divided into distribution typeand optic-split type according to the function.

GTS-16-4 is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, spliting, and distribution can be done in this box, and meanwhile it provides solid protection and management for FTTx network building.

Parameters

Product Detail

GTS-12-1 Technical Specification

For the environment

● Operating temperature: -40°℃~+65°℃

● Relative humidity: <85% (+30°C)

● Atmospheric pressure: 70Kpa~106Kpa

● Protection class:IP67

Standards comply

IThe following clauses quoted by this standard and become the standard clause. For dated references, subsequent amendments (excluding Corrigendum contents) or revisions do not apply to this standard, however, encourage the latest version of this specification according to the parties reach an agreement to study the possibility of using these files. The citated document without date, apply to the latest version of this specification.

UL 94, Test for Flammability of Plastic Materials for Parts in Devices andAppliances YD/T 2150-2010 Optical fiber cable distribution box.

Main Features

● Made of high quality engineer plastic material (PP),Good mechanical strength, Elegant appearance, sturdiness and durability.

● Suitable for indoor or outdoor ,wall-mounted,pole installation.

● Built-in Stacked splice tray, easy for open, the splice tray can be taken down, easy for installation and maintenance.

● Fiber routing is reasonable.

● Clamping for feeder cable and drop cable, fiber splicing,fixation,storage, distribution...etc allin one.

Main specification

● Insertion loss: ≤13.8dB

● UPC return loss: ≥55dB

● APC return loss: z55dB

● Thunder-proof technical datasheet

The insulation resistance between the grounding device and the metal parts of the box is no less than 2x104MΩ/500v (DC)

IR≥2X 10+ MQ/500V.

The voltage resistance between the grounding device, and the boxand its metal parts is no less than 30oov (DC)/min, no puncture, no flashover;U≥3000V

Configuration table

Model	Size (Pic I) ABC	Max Capacity	Hang a wall to install size F*H	Capacity of FOSC (Bunchy)	Into the largest cable diameter
GTS-8-2	27323492mm	8（SC/APC）	107*156mm	84 cores	18mm*2

Installation

Wall-mounted installation

Drill 4 holes into the wall based on the size in table 1, place the expansion bolt Φ7.5*40, place the box to match up the holes and use bolt tofasten.

Pole-mounted installation

Fix 1 set of the pole ring to the telecom pole, as below.

Packing

● Packing: carton

● Storage temperature: -20 °C ~ +65 °C

● Storage humidity: ≤ 95% (30 °C),no corrosive gases around

● Transport: cars, trains, ships and aircraft

● Transportation to avoid collisions, falls, rain and snow poureddirectly attack and daylight exposure.

Fiber connector installation:

Previous : 8 Ports SC Fiber Optic Splitter Box Datasheet Next : HL-IP68-M10P