Standard Multicore Bundle Distribution Patch Cord

Multicore Fiber Bundle Patch Cord: An Innovative Solution for High-Density Fiber Connections

Multicore Fiber Bundle Patch Cord is a high-performance connection cable that integrates multiple optical fibers into a compact sheath. It is designed for high-density, high-capacity fiber network scenarios. Through the modular design of multi-core integration, it greatly simplifies the wiring process of complex networks, improves transmission efficiency and space utilization, and is one of the core components of modern data centers, 5G communications and industrial networks.

High-density integration

A single jumper can integrate 12-core, 24-core, 48-core or even more optical fibers, and achieve one-time plug-in and unplugging through the MPO/MTP interface (multi-core connector), saving more than 50% of wiring space.

Typically used in data center cabinets, core switches and other high-density equipment interconnection.

Pre-terminated design

Factory prefabricated terminations (such as MPO to LC branch jumpers) avoid on-site splicing, reduce 30% installation time, and reduce the risk of human operation errors.

Supports flexible configuration of polarity (A/B/C type) to adapt to different network architecture requirements.

High-speed transmission

Supports 40G/100G/400G high-speed networks, multi-mode optical fiber (OM3/OM4/OM5) can meet short-distance (≤150 meters) high-bandwidth transmission, and single-mode optical fiber (OS2) is suitable for long-distance (≥10 kilometers) backbone networks.

Reliability and flexibility

The sheath is made of LSZH (low smoke zero halogen) or armored material, which is resistant to high temperature and bending, and can adapt to industrial environments (-40℃ to +85℃).

The number of cores, length (0.5m~50m), interface type (such as MPO-LC, MPO-SC) and end face polishing (UPC/APC) can be customized.

Application scenarios

Data center

Used for high-speed interconnection between servers, switches and optical modules, supports 40G QSFP+/100G QSFP28 modules, and simplifies wiring through MPO-24 core to LC branch jumper.

5G base station and telecommunications network

Single-mode multi-core jumper is used for long-distance backbone transmission between base stations, and multi-mode jumper supports high-density connection in the machine room.

Industrial automation

Armored multi-core jumper is resistant to oil and vibration, and is suitable for factory equipment networking and rail transit signal systems.

Cloud computing and supercomputing center

OM5 multi-core jumper supports SWDM (short wave wavelength division multiplexing) technology, single fiber transmits multi-wavelength signals, and improves bandwidth utilization.

Purchase suggestions

1.Choose fiber type according to the scenario

Short-distance high-speed transmission: multimode OM4/OM5 (100G@150m).

Long-distance backbone network: single-mode OS2 (10km+, low loss).

2.Pay attention to interfaces and polarity

Confirm the device interface type (MPO, LC, SC, etc.) and polarity requirements (Type-A/B/C) to avoid compatibility issues.

3.Certification and warranty

Choose products that are IEC/TIA certified, and ensure that the supplier provides at least 12 months of warranty and technical support.

4.Customized requirements

Special environments (such as outdoor, high temperature) require specified sheath materials (armored, LSZH) and tensile design.