English
- English
- Español
- SaudiArabia
Pre-connectorized Fiber Optic Cable Distribution Box
HUALUE Pre-connectorized Fiber Distribution Box for FTTH and FTTx supports fast installation with pre-terminated fiber cables, adapters and PLC splitter options.
Pre-connectorized Fiber Optic Cable Distribution Box
GFS-8X
1. General
1.1 Description
Pre-connectorized optical distribution box as the most advanced FTTX network distribution node equipment, provide quick and reliable connection, good protection and management for the FTTX network.
Production type | Classification |
GFS-8X | Pre-connectorized fiber optic cable distribution box |
Pic.1 GFS-8X
1.2 Standards Comply
The production offered by FTTXTECH are designed, manufactured and tested according to the standards as follows:
IEC 62134-1-2002 | Fiber optic enclosures - Part 1: Generic specification |
IEC61300-2 | Fiber optic interconnecting devices and passive components - Basic test and measurement procedures |
IEC60068-2 | Basic environmental testing procedures for electric and electronic products |
1.3 Applications Environment
Item | Value |
Operation temperature | -40 ºC～+65 ºC |
Installation temperature | -15 ºC～+40 ºC |
Storage temperature | -45 ºC～+75 ºC |
Relative humidity | ≤85% (+30℃) |
Atmospheric pressure | 70KPa~106Kpa |
2. Characteristics
1. Advanced structure design, easy operation and reasonable routing.
2. Material: PC+ABS.
3. Moisture proof, waterproof, dust-proof, anti-aging.
4. Protection level up to IP65.
5. 8 in / out cable holes, 8 pre connected adapters.
6. Installation method: pole-mounted, aerial-mounted, wall-mounted.
7. It can be equipped with drop cable storage tray to meet the storage of 50 meters 5mm round cable.
3. Specifications
3.1 Mechanical specifications
Pic.2 GFS-8X
Item | Specifications | Remark |
Material of housing | PC+ABS | |
Material of internal components | PC+ABS/ABS | |
Material of metal accessory | High-quality stainless steel | |
External dimension(mm) | 313*195*120 mm | A*B*C |
Installation hole position(mm) | 175.5*260.2*52*177.6 mm | D*E*F*G |
Color | Black/ Gray | According to customer requirements |
Number of cable port | 8 | |
Fiber cable dimension of cable port (mm) | Φ5-Φ17 | |
Number of Pre-connectorized adaptors | 8 | 8 Black(Default) |
Fusion capacity(Max) | 68 | Tray A ,24x2=48, 2 layers of heat-shrinkable splice protection sleeve. |
Tray B ,20x1=20, 2 layers of heat-shrinkable splice protection sleeve. | ||
Micro PLC Splitter | 1x2 | Splitter size：60x7x4mm. Tray A , 2pcs*2; Tray B , 2pcs; Fiber storage disk:2 pcs. |
1x4 | ||
1x8 | ||
IP grade | IP65 | |
Flammability | UL-94HB(Default) | |
Neutral salt spray test (NSS) | 48h |
3.2 Optical specifications
Model | Splitter or pigtail | IL(dB)-Splitter | RL(dB) -Splitter | IL(dB)- Distribution box | Test method |
GFS-8X | Pigtail-SC/APC-00-SM-SX(1C1F)-OD0.9MM-PVC-G657A2-Cable Color(Defaults)-Indoor-RoHS-1.5m | ≤0.3 | ≥55dB | ≤0.5 | IL: IEC61300-3-4 Method B RL: IEC61300-3-6 Method 1 |
1x2 PLC Splitter, with SCAPC connector | ≤4.0 | ≥55dB | ≤4.2 | ||
1x4 PLC Splitter, with SCAPC connector | ≤7.4 | ≥55dB | ≤7.6 | ||
1x 8 PLC Splitter, with SCAPC connector | ≤10.5 | ≥55dB | ≤10.7 |
The optical parameters shown in the table above are default values, and can be customized according to requirements.
3.3 Port color
Red | Blue | Green | Yellow |
The color of the product may vary and is for reference only.
4. Routing diagram
Pic.2 GFS-8X routing
5. Splicing tray
Item | Splicing tray A | Splicing tray B |
Dimensions(H x W x D; mm) | 139x101 x 20 | 201 x 128 x 19 |
Net weight (kg) | 0.037 | 0.066 |
Picture |
|
|
Color | RAL7035 | RAL7035 |
Material | PC+ABS | PC+ABS |
Splicing capacity of a tray(cores) | 24 (2 layers of heat shrinkable protective sleeve), 2 slot for 1/8 PLC | 20(2 layer of heat shrinkable protective sleeve), 2 slot for 1/8 PLC |
Default(PCS) | 2 | 1 |
6.Accessories
No. | Part name | Reference picture | Unit | Quantity | Remark |
1 | Users’ manual | / | pcs | 1 | EN |
2 | Splitter test report | / | pcs | 1 | EN |
3 | Heat-shrinkable protection sleeve |
| pcs | 8 | L=45mm |
4 | Nylon cable tie |
| pcs | 10 | 3x100mm |
5 | Bare fiber protection tube |
| pcs | 1 | OD4mm x 50cm |
6 | Wall-mounted kit |
| set | 1 | Optional as customer’s request. (Expanded plastic plug Φ7.5x40mm, Phillips self-tapping screws M5x40mm.) |
7 | Pole-mounted kit |
| set | 1 | Optional as customer’s request |
8 | Aerial-mounted kit |
| set | 1 | Optional as customer’s request |
9 | Drop cable storage tray |
| pcs | 2 | Optional as customer’s request |
7. Installation
7.1. Wall-mounted installation
Drill 4 holes on the wall according to the size of the bottom wall hanging, place the expansion plug Φ 7.5 * 40, place the box to match the hole, and fasten with screws. (Pic.4)
Pic.4 Wall mounted installation
7.2. Pole-mounted installation
Pass the stainless steel belt through the slot of the back plate and fix it on the pole (Pic.5)
Pic.5 Pole-mounted installation
7.3. Aerial-mounted installation
Hang the hook on the messenger, and tighten the bolts and nuts of the hook.(Pic.6)
Pic.6 Aerial-mounted installation
7.4. Wall-mounted installation (With drop cable storage tray)
Install the drop cable storage tray on the back of the box；Drill 4 holes in the wall according to the dimension of the drop cable storage tray mounting hole, place the expansion plug Φ 7.5 * 40, place the box to match up the holes, and fasten with the screws. (Pic.7)
Pic.7 Wall-mounted installation (With drop cable storage tray)
7.5. Pole-mounted installation (With drop cable storage tray)
Install the drop cable storage tray on the back of the box；Pass the stainless steel belt through the slot of the drop cable storage tray and fix it on the pole with buckle. (Pic.8)
Pic.8 Pole-mounted installation(With drop cable storage tray)
7.6. Aerial-mounted installation (With drop cable storage tray)
Install the drop cable storage tray on the back of the box；Use the small metal plate to fix the distribution box to the messenger. (Pic.9)
Pic.9 Aerial-mounted installation (With drop cable storage tray)
Previous : Outdoor HL2310 FastConnect Field Assembly Optical Connector
Next : Fiber Optic Splice Closure
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
INQUIRY
Add Successfully
